Local web server / AVG TCP Server updates

Local web server / AVG TCP Server updates

Initially, you have to download the update files to your local web server (AVG TCP Server). Then define the server as the update source for particular AVG 7.1 client stations in DataCenter.

Download the update files to your local web server
The state of update files is regularly checked by AVGINET Lite application. When new update files are detected, the AVGINET Lite downloads them to your local web server (AVG TCP Server) immediately. AVGINET Lite program parameters can be set as follows:

from the Start / Programs menu launch the AVG Admin 7.1 / AVG TCP Monitor
in the dialog window select the Configuration button
on the General tab, tick the Enable HTTP support and fill in your local web server's (AVG TCP Server's) root address into the Local HTTP server field; this is where the update files will be stored
go on to the InetLite tab where the Update URL and Proxy fields have been activated when the General tab's field Local HTTP field was filled in:
- the Update URL is set to the Grisoft server update source by default
- fill in the Proxy field if you use a proxy server
on the Scheduler tab you can set up the frequency of the update check and download via the AVGInet Lite application

Central update of the clients
You will configure the local web server (AVG TCP Server) central updates for all the clients in DataCenter:

launch the AVGADMIN application
select a station from the list and double-click to configure the station's parameters
in the Internet parameters group fill in the server name and its complete URL

Repeat these steps for all the client stations in your network.

Continue to the page Installation completed >>>

Note:
For detailed information on AVG Anti-Virus 7.1 Remote Administration please refer to the AVG 7.1 Remote Administration User Manual.